Tag Archives: Curtiss-Wright Corporation

2 July 1943

Captain Charles B. Hall, United States Army Air Forces
Captain Charles B. Hall, United States Army Air Corps

2 July 1943: 1st Lieutenant Charles Blakesly Hall, United States Army Air Corps, of the 99th Fighter Squadron (which was briefly attached to the 324th Fighter Group) was the first of the famous “Tuskegee Airmen” to shoot down an enemy airplane during World War II. At the time the 99th was based at El Haouaria Airfield on the coast of Tunisia and was patrolling the island of Sicily. The squadron’s primary mission was ground attack.

On 2 July, the 99th was escorting North American Aviation B-25 Mitchell medium bombers near Castelventrano,  in western Sicily. Enemy fighters intercepted the flight.

It was my eighth mission and the first time I had seen the enemy close enough to shoot him. I saw two Focke-Wulfs following the bombers just after the bombs were dropped. I headed for the space between the fighters and bombers and managed to turn inside the Jerries. I fired a long burst and saw my tracers penetrate the second aircraft. He was turning to the left, but suddenly fell off and headed straight into the ground. I followed him down and saw him crash. He raised a big cloud of dust.

Lieutenant Hall was officially credited with destroying a Focke-Wulf Fw 190,¹ the most effective Luftwaffe fighter of World War II. Not only was Lieutenant Hall’s victory the first for the squadron, but it was also the only enemy airplane to have been shot down by the 99th Fighter Squadron during 1943.

1st Lieutenant Charles B. Hall, in the cockpit of his Curtiss P-40L Warhawk fighter, points to a swastika which represents the Luftwaffe Focke-Wulf Fw 190 that he shot down, 2 July 1943. (U.S. Air Force)
1st Lieutenant Charles B. Hall, in the cockpit of his Curtiss-Wright P-40L Warhawk fighter, points to a swastika which represents the Luftwaffe Focke-Wulf Fw 190¹ that he shot down, 2 July 1943. (U.S. Air Force)

Charles Blakesly Hall was the second child of Franklin Hall, a 30-year-old kiln-burner from Mississippi, and Anna Blakesly Hall, 25 years old, and also from Mississippi. Charles was born 25 August 1920 at his parents home, 742 N. Columbia Street, Brazil, Indiana. He graduated from Brazil High School in 1938 and then attended Eastern Illinois University. He majored in Pre-Med, and was active in sports. Hall worked as a waiter while attending college.

After three years of college, on 12 November 1941, Hall enlisted as an Aviation Cadet, Air Corps, United States Army, at Fort Benjamin Harrison, Lawrence, Indiana. Military records indicate that he stood 5 feet, 7 inches tall (170 centimeters) and weighed 150 pounds (68 kilograms).

Aviation Cadet Charles B. Hall, U.S. Army Air Corps, circa 1941 (NASM)

Charles Hall was part of a group of African-American airmen that would be known as the Tuskegee Airmen. They were initially trained at the Tuskegee Institute, Tuskegee, Alabama, an all-black college which had been established in 1881 by Booker T. Washington. Initial flight training was conducted at Moton Field, a few miles away, and the cadets transitioned into operational aircraft at Tuskegee Army Air Field. Additional flight trained took place at Cochran Field, near Montgomery, Alabama.

On completion of training, Charles B. Hall was commissioned as a second lieutenant, U.S. Army Air Corps, on 3 July 1942. (Serial number 0790457)

Lieutenant Charles B. Hall married Miss Maxine Jessie Parish, a stenographer, in Vigo County, Indiana, 14 December 1942.

Captain and Mrs. Charles B. Hall (Maxine Parrish Hall), circa 1945. (William R. Thompson Digital Collection, Illinois Heartland Library System 2007-1-526-27)

The 99th Fighter Squadron was the first unit to be assigned overseas. It was sent to North Africa, 2 April 1943, as part the 33rd Fighter Group.

The 99th Fighter Squadron was the first unit to be assigned overseas. It was sent to North Africa, 2 April 1943, as part the 33rd Fighter Group.

Captain Charles B. Hall (left) is congratulated by Major General John K. Cannon, Commanding General, Twelfth Air Force. (U.S. Air Force)

Hall was the first African-American to be awarded the Distinguished Flying Cross. Before the war ended, he had flown 198 combat missions and had been promoted to the rank of major.

Captain Charles B. Hall is congratulated by General Dwight D. Eisenhower on the award of the Distinguished Flying Cross.

Major Hall transferred to the Air Force Reserve. He worked at Tinker Air Force Base, Oklahoma City, as a civil service employee from 1949 until retiring in 1967. He then worked at the Federal Aviation Administration.

Hall later married Miss Lola Delois Miles of Oklahoma City. They had two children and remained together until his death, 22 November 1971.

Major Charles Blakesly Hall, United States Air Force (Retired), was buried at Hillcrest Memorial Gardens, Oklahoma City, Oklahoma.

1st Lieutenant Charles B. Hall, 99th Fighter Squadron, 33rd Fighter Group, flew this Curtiss-Wright P-40L-15-CU Warhawk, 42-10895, when he shot down an enemy airplane, 2 July 1943. (U.S. Air Force)

Charles Hall’s fighter was a Curtiss-Wright P-40L-15-CU Warhawk, 42-10895. The P-40L (Curtiss-Wright Model 87-B3) differed from the majority of P-40s in that it was powered by a Packard V-1650-1 Merlin engine instead of the Allison V-1710.

The P-40L was a lightened version of the P-40F, with fuel tanks removed from the wings, and armament reduced from six to four Browning AN-M2 .50-caliber machine guns, with only 201 rounds of ammunition per gun. Identifying features of the P-40F and P-40L are the absence of a carburetor intake on the top of the engine cowling, a very deep radiator scoop below the propeller spinner, and a fuselage lengthened 2 feet, 2 inches (0.660 meters).

The Curtiss-Wright P-40L Warhawk was a lightened version of the Rolls-Royce Merlin-powered P-40F. This P-40F is armed with six .50-caliber machine guns, while the P-40L carried just four. (Niagara Aerospace Museum)

The P-40L was 33 feet, 3-23/32 inches (10.15286 meters) long with a wingspan of 37 feet, 3½ inches (11.36650 meters) and height of 10 feet, 7-25/32 inches (3.24564 meters). The fighter’s empty weight was approximately 6,870 pounds (3,116 kilograms) and the gross weight was 9,416 pounds (4,271 kilograms).

The V-1650-1 was the first version of the Rolls-Royce Merlin to be built under license by the Packard Motor Car Company of Detroit, Michigan. It was developed from the Merlin XX and designated Merlin 28. The Packard V-1650-1 was a right-hand tractor, liquid-cooled, supercharged, 1,649-cubic-inch-displacement (27.04-liter) single overhead cam (SOHC) 60° V-12 engine. It had a compression ratio of 6.0:1, and required 100-octane aviation gasoline. It was rated at 1,080 horsepower at 2,650 r.p.m., and 1,300 horsepower at 3,000 r.p.m. for takeoff. The Military Power rating was 1,240 horsepower at 3,000 r.p.m. at 11,500 feet (3,505 meters), and 1,120 horsepower at 18,500 feet (5,639 meters). The engine drove an 11-foot (3.353 meter) diameter, three-bladed Curtiss Electric constant-speed propeller through a 0.477:1 gear reduction. The V-1650-1 weighed 1,512 pounds (686 kilograms).

The P-40L had a maximum speed of 368 miles per hour (592 kilometers per hour).

Curtiss-Wright built 13,738 P-40-series aircraft. 3,866 of these were the P-40L variant.

This bronze statue of Major Charles Blakesly Hall by Joel Randall is displayed at Tinker Air Force Base, Oklahoma City, Oklahoma.
This bronze statue of Major Charles Blakesly Hall by Joel Randall is displayed at Tinker Air Force Base, Oklahoma City, Oklahoma. (Sculptor Joel Randall)

¹ A study of U.S. Army Air Force claims of enemy aircraft destroyed (Andrew Arthy and Morten Jessen, 2013) indicates that no Focke Wulf Fw 190s were present at the time, however, Messerchmitt Bf 109s of Jagdgeschwader 77 were defending the target against B-25s and P-40s. Two were lost on that day. The authors suggest that opposing aircraft were often misidentified.

© 2018, Bryan R. Swopes

27 June 1952

Jean L. Ziegler in the cockpit of Bell X-2 46-675 after landing on Rogers Dry Lake, at Edwards Air Force Base, California, 27 June 1952. (NASA)

27 June 1952: The Bell X-2 research rocketplane, with company test pilot Jean Leroy (“Skip”) Ziegler at the controls, was airdropped from a “mothership,” a Boeing B-50A-5-BO Superfortress, 46-011, over Edwards Air Force Base, California. This was the first flight of the X-2 Program, and was an unpowered glide flight for pilot familiarization.

On touch down, the nose wheel collapsed and the aircraft slid across the dry lake bed, but was not seriously damaged.

Two X-2 rocketplanes, serial numbers 46-674 and 46-675, were built by the Bell Aircraft Corporation, which has also built the X-1 series. The second X-2 was the first one to fly.

Bell Aircraft Corporation test pilot Jean Leroy (“Skip”) Ziegler standing next to the Bell X-2 rocket plane on Rogers Dry Lake, California, after the first glide flight, 27 June 1952. The nose wheel collapsed on landing. (NASM)

The X-2 was a joint project of the U.S. Air Force and NACA (the National Advisory Committee for Aeronautics, the predecessor of NASA). The rocketplane was designed and built by Bell Aircraft Corporation of Buffalo, New York, to explore supersonic flight at speeds beyond the capabilities of the earlier Bell X-1 and Douglas D-558-2 Skyrocket. In addition to the aerodynamic effects of speeds in the Mach 2.0–Mach 3.0 range, engineers knew that the high temperatures created by aerodynamic friction would be a problem, so the aircraft was built from Stainless Steel and K-Monel, a copper-nickel alloy.

The Bell Aircraft Corporation X-2 was 37 feet, 10 inches (11.532 meters) long with a wingspan of 32 feet, 3 inches (9.830 meters) and height of 11 feet, 10 inches (3.607 meters). Its empty weight was 12,375 pounds (5,613 kilograms) and loaded weight was 24,910 pounds (11,299 kilograms).

Bell X-2 46-675 on its transportation dolly at Edwards Air Force Base, california, 1952. (NASA)
Bell X-2 46-675 on its transportation dolly at the NACA High Speed Flight Station, Edwards Air Force Base, California, 1952. (NASA)

The X-2 was powered by a throttleable Curtiss-Wright XLR25-CW-1 rocket engine that produced 2,500–15,000 pounds of thrust burning alcohol and liquid oxygen. Rather than use its limited fuel capacity to take off and climb to altitude, the X-2 was dropped from a modified heavy bomber as had been the earlier rocketplanes. The launch altitude was 30,000 feet (9,144 meters). After the fuel was exhausted, the X-2 glided to a touchdown on Rogers Dry Lake at Edwards Air Force Base.

A four-engine Boeing B-50A Superfortress bomber, serial number 46-011, was modified as the ”mothership.” A second Superfortress, B-50D-95-BO 48-096, was also modified to carry the X-2, and was redesignated EB-50D. During the flight test program, the X-2 reached a maximum speed of Mach 3.196 (2,094 miles per hour, 3,370 kilometers per hour) and a maximum altitude of 126,200 feet (38,466 meters).

On 12 May 1953, less than one year after the first glide flight, Skip Ziegler was in the cockpit of 46-675 while it was being carried on a captive test flight aboard the B-50A Superfortress. An internal explosion destroyed the X-2 and killed Ziegler and another crewman aboard the mothership. The rocketplane fell into Lake Ontario and neither it nor Ziegler’s body were ever recovered. The Superfortress was able to land, but was so badly damaged that it never flew again.

Jean L. "Skip" Ziegler, with the Bell X-5 at Edwards Air Force Base, 1952. (LIFE Magazine via Jet Pilot Overseas.
Jean Leroy “Skip” Ziegler, with the Bell X-5 at Edwards Air Force Base, 1952. (LIFE Magazine via Jet Pilot Overseas.)

© 2018, Bryan R. Swopes

6 May 1935

Curtiss-Wright Model 75, X17Y. (Ray Wagner Collection, San Diego Air & Space Museum Archives)

6 May 1935: At Buffalo, New York, the prototype Curtiss-Wright Model 75, X17Y, serial number 11923, made its first flight.

Donovan Reese Berlin. (Niagara Aerospace Museum)

Designed by Donovan Reese Berlin, the airplane was a modern design of all metal construction, with fabric covered control surfaces. The Model 75 was a single-seat, single-engine low-wing monoplane with retractable landing gear.

Curtiss-Wright Model 75, X17Y. (Ray Wagner Collection, San Diego Air & Space Museum Archives)

In its original configuration, the Model 75 was powered by an air-cooled, supercharged 1,666.860 cubic inch displacement (27.315 liter) Wright Aeronautical Division GR1670A1 two-row 14-cylinder radial engine. The GR1670A1 was a developmental engine with a compression ratio of 6.75:1. It was rated at 775 horsepower at 2,400 r.p.m. at Sea Level, and 830 horsepower at 2,600 r.p.m. for takeoff, burning 87-octane gasoline. The engine was 3 feet, 9 inches (1.143 meters) in diameter, 4 feet, 4–25/32 inches (1.341 meters) long, and weighed 1,160 pounds (526 kilograms). The GR1670A1 drove a three-bladed Curtiss Electric constant-speed propeller through a 16:11 gear reduction.

The GR1670A1 was also used in the Seversky SEV-S1, NR18Y, a record-setting experimental variant of the rival Seversky P-35.

The United States Department of Commerce, Bureau of Air Commerce, registered X17Y to the Curtiss-Wright Corporation, Kenmore & Vulcan Street, Buffalo, New York, on issued 1 June 1936. This registration was cancelled 26 April 1937.

Curtiss-Wright Model 75, X17Y. (Ray Wagner Collection, San Diego Air & Space Museum Archives)
Curtiss-Wright Model 75, X17Y. (Ray Wagner Collection, San Diego Air & Space Museum Archives)

The Curtiss-Wright Model 75 would be developed into the P-36 Hawk fighter for the U.S. Army Air Corps. France ordered it as the H75A-1, and in British service, it was known as the Mohawk Mk.I.

The tenth production P-36 was modified with a liquid-cooled Allison V-1710 V-12 engine to become the prototype XP-40.

1st Lieutenant Benjamin Scovill Kelsey in the cockpit of a Curtiss-Wright P-36A Hawk, circa 1938. (U.S. Air Force)
1st Lieutenant Benjamin Scovill Kelsey, Air Corps, United States Army, with a Curtiss Wright P-36A Hawk, Air Corps serial number 38-2, at Wright Field, Ohio, circa 1938. (Ray Wagner Collection/San Diego Air & Space Museum Archives)
Curtiss-Wright P-36B 38-020. (U.S. Air Force)
Curtiss-Wright P-36B 38-020. (U.S. Air Force)
Curtiss-Wright P-36C camouflage test, Maxwell Field, 1940. (Ray Wagner Collection, San Diego Air & Space Museum Archives)
Curtiss-Wright P-40 Warhawk, 55th Pursuit Squadron, Oakland, CA, 1941 (IWM FRE11437)

© 2019, Bryan R. Swopes

26 April 1939

Curtiss-Wright’s Chief Test Pilot, H. Lloyd Child, in the cockpit of a P-40 Warhawk, circa 1940. (Rudy Arnold Collection/NASM)

26 April 1939: The United States Army Air Corps placed an order for 524 Curtiss-Wright P-40 Warhawks. This was the largest production order for any U.S.-built fighter since World War I. The total cost was $12,872,398.¹

The order was authorized by the Air Corps Expansion Act, approved by Congress 3 April, and signed by President Roosevelt on 26 April 1939.

The Curtiss-Wright Corporation Hawk 81 (P-40 Warhawk) was a single-seat, single-engine pursuit, designed by Chief Engineer Donovan Reese Berlin. It was developed from Berlin’s radial-engine P-36 Hawk. The P-40 was a low-wing monoplane of all-metal construction and used flush riveting to reduce aerodynamic drag. It had an enclosed cockpit and retractable landing gear (including the tail wheel). Extensive wind tunnel testing at the NACA Langley laboratories refined the airplane’s design, significantly increasing the top speed.

The first production Curtiss-Wright P-40 Warhawk, 39-156. (U.S. Air Force)

The new fighter was 31 feet, 8-9/16 inches (9.666 meters) long with a wingspan of 37 feet, 3½ inches (11.366 meters) and overall height of 9 feet, 7 inches (2.921 meters). The P-40’s empty weight was 5,376 pounds (2,438.5 kilograms) and gross weight was 6,787 pounds (3,078.5 kilograms).

The P-40 was powered by a liquid-cooled, supercharged, 1,710.597-cubic-inch-displacement (28.032 liter) Allison Engineering Co. V-1710-C15 (V-1710-33). This was a single overhead cam (SOHC) 60° V-12 engine designed by Harold Caminez, Allison’s chief engineer. The V-1710-33 had a compression ratio of 6.65:1. It was rated at 930 horsepower at 2,600 r.p.m. at 12,800 feet (3,901 meters), and 1,040 horsepower at 2,800 r.p.m. for takeoff, burning 100-octane gasoline. The engine turned a three-bladed Curtiss Electric constant-speed propeller through a 2:1 gear reduction. The V-1710-33 was 8 feet, 2.54 inches (2.503 meters) long, 3 feet, 5.88 inches (1.064 meters) high, and 2 feet, 5.29 inches (0.744 meters) wide. It weighed 1,340 pounds (607.8 kilograms).

Allison Engineering Co. V-1710-33 V-12 aircraft engine at the Smithsonian Institution National Air and Space Museum Steven F. Udvar-Hazy Center. (NASM)

The cruising speed of the P-40 was 272 miles per hour (438 kilometers per hour) and the maximum speed was 357 miles per hour (575 kilometers per hour) at 15,000 feet (4,572 meters). The Warhawk had a service ceiling of 30,600 feet (9,327 meters) and the absolute ceiling was 31,600 feet (9,632 meters). The range was 950 miles (1,529 kilometers) at 250 miles per hour (402 kilometers per hour).

Captain Charles W. Stark, Jr., 35th Pursuit Squadron, 8th Pursuit Group, climbing from the cockpit of a Curtiss-Wright P-40 Warhawk, 39-188, at Langley, Field, Virginia, 1941. Note the single .30-caliber machine gun visible on the left wing. (Rudy Arnold Collection/NASM)

The fighter (at the time, the Air Corps designated this type as a “pursuit”) was armed with two air-cooled Browning AN-M2 .50-caliber machine guns on the engine cowl, synchronized to fire through the propeller, with 380 rounds of ammunition per gun. Provisions were included for one Browning M2 .30-caliber aircraft machine gun, with 500 rounds of ammunition, in each wing.

The first production P-40 Warhawk, 39-156, made its first flight 4 April 1940. The 8th Pursuit Group at Langley Field, Virginia, was the first Army Air Corps unit to be equipped with the P-40.

Curtiss-Wright P-40 Warhawks of the 8th Pursuit Group at Langley Field, Virginia, 1940. (Unattributed)

After 200 P-40s were produced for the Air Corps, production was interrupted to allow Curtiss-Wright to build 100 Hawk 85A-1 export variants for the French Armée de l’air, then engaged with the invading forces of Nazi Germany. When France surrendered 22 June 1940, none of these airplanes had been delivered. The order was then assumed by the British Royal Air Force as the Tomahawk I.

U.S. Warhawk production resumed as the improved P-40B, and the remainder of the P-40 order was cancelled.

¹ Equivalent to $291,034,849 in 2024

© 2018, Bryan R. Swopes

24 April 1939

The Curtiss XP-40 prototype at Langley Field in the original configuration. (NASA)
The Curtiss-Wright XP-40 prototype, 36-10, at Langley Field in the original configuration. Compare this to the first production P-40 Warhawk in the photograph below. (NASA)
Curtiss P-40 Warhawk 39-156. (U.S. Air Force)
Curtiss-Wright P-40 Warhawk 39-156. (U.S. Air Force)

24 April 1939: Curtiss-Wright’s prototype fighter, the XP-40 (Model 75P), was evaluated by the National Advisory Committee for Aeronautics (NACA) at the Langley Memorial Aeronautical Laboratory, Langley Field, Virginia, in March and April 1939. NACA engineers placed the XP-40 inside the Full-Scale Wind Tunnel, which was capable of accepting airplanes with wing spans of up to 40 feet (12.2 meters).

Compare this production Curtiss-Wright P-36A Hawk to the first production P-40 Warhawk in the photograph below.
Curtiss Model 81, P-40 Warhawk, 39-156. (San Diego Air and Space Museum Archive)

The airplane was a production Curtiss P-36A Hawk, serial number 38-10, which had been modified by replacing its original air-cooled Pratt & Whitney Twin Wasp S1C1-G (R-1830-17) 14-cylinder radial engine with a Harold Caminez-designed, liquid-cooled, supercharged, 1,710.597-cubic-inch-displacement (28.032 liter) Allison Engineering Co. V-1710-C13 (V-1710-19).

This was a single overhead cam (SOHC) 60° V-12 engine with four valves per cylinder and a compression ration of 6.65:1. It had a Normal Power rating of 910 horsepower at 2,600 r.p.m. at Sea Level, and 1,060 horsepower at 2,950 r.p.m. for Takeoff. At 10,000 feet (3,048 meters), the V-1710-19 had Maximum Continuous Power rating of 1,000 horsepower at 2,600 r.p.m., and Military Power rating of 1,150 horsepower at 2,950 r.p.m. The engine required 100/130-octane aviation gasoline. It drove a three-bladed Curtiss Electric constant-speed propeller through a 2:1 gear reduction.

The V-1710-19 was 8 feet, 1.75 inches (2.483 meters) long, 3 feet, 4.75″ (1.035 meters) high and 2 feet, 4.94 inches (0.735 meters) wide. It weighed 1,320 pounds (599 kilograms).

Curtiss XP-40 prototype in the NACA wind tunnel at Langley Field, Virginia, 24 April 1939. The technician at the lower left of the photograph provides scale. (NASA)
Curtiss-Wright XP-40 prototype in the NACA wind tunnel at Langley Field, Virginia, 24 April 1939. The technician at the lower left of the photograph provides scale. (NASA)

The primary benefit of the engine change was the streamlined fuselage that resulted. The new airplane was capable of a speed of 366 miles per hour (589 kilometers per hour), a 53 miles per hour (85 kilometers per hour) increase over the P-36.

Over a two-month period, NACA engineers made a number of improvements. The radiator was moved forward under the engine and the oil coolers utilized the same air scoop. The exhaust manifolds were improved as were the landing gear doors.

When they had finished, Lieutenant Benjamin Scovill Kelsey flew the modified XP-40 back to Curtiss at Buffalo, New York. Its speed had been increased to 354 miles per hour (570 kilometers per hour), a 12% improvement. Other improvements were recommended which may have increased the XP-40’s speed by an additional 18 miles per hour (29 kilometers per hour). By December 1939, the airplane had been further improved and was capable of 366 miles per hour (589 kilometers per hour).

These photographs show the full-size prototype in the NACA wind tunnel at Langley, 24 April 1939. Two days later, the U.S. Army Air Corps ordered 524 airplanes as the P-40 Warhawk. By the time production ended in 1945, 13,738 Warhawks had been built.

Curtiss XP-40 in the NACA full scale wind tunnel, Langley Field, Virginia, April 1939. (NASA)
Curtiss XP-40 in the NACA full scale wind tunnel, Langley Field, Virginia, April 1939. (NASA)

© 2018, Bryan R. Swopes